Product description
Tips:
1.To prevent from scalding, please do not touch the solution of the glue that out from the gun.
2.In order to do your job smoothly, please preheat the glue gun for about 3-5 minutes( the warm-up time) before using.
Note:The glue stick cannot be taken down once be used.

Advantages :
Our glue gun will not leak, we choose the best quality glue gun for our customer. 

Instructions:
1. This series of products can be applied to rubber strips with a diameter of 7-7.5mm.
2. Insert the rubber strip from the end of the glue gun, send it into the barrel, plug in the power supply and preheat for 5-8 minutes. Pull the trigger to extrude the sol and control the amount of glue.
3. During use, if you can't use up one adhesive strip at a time, you don't need to take out the adhesive strip. You can plug in the power supply to warm up for 5-8 minutes before using it directly.

Specifications :
About hot melt glue gun:
Material: Plastic & Aluminum
Working power: 20W
Working voltage: 100 to 220V
Working temperature: 180℃
Nozzle diameter: 0.070-0.078 inch
Warm-up time: 5-8 minutes
Cable length: 55 inch
About glue sticks:
Color: Transparent
Package: Simple Packing
Cure time: 10-20S
Glue sticks length:7*100mm

Package Include:
Option one included:1 X Glue gun(Blue/Black/Pink/Yellow)
Option two included: 10 X glue sticks (transparent)
Option three included:20 X glue sticks (transparent)
Option four included: 30 X glue sticks (transparent)